{"id":39961,"date":"2025-07-21T17:22:06","date_gmt":"2025-07-21T15:22:06","guid":{"rendered":"https:\/\/www.italpassion.fr\/?p=39961"},"modified":"2025-07-21T16:21:57","modified_gmt":"2025-07-21T14:21:57","slug":"saves-e20000-using-a-3d-printer-to-repair-his-lamborghini-murcielago","status":"publish","type":"post","link":"https:\/\/www.italpassion.fr\/en\/lamborghini\/il-economise-20-000-e-grace-a-une-imprimante-3d-pour-reparer-sa-lamborghini-murcielago\/","title":{"rendered":"He saves \u20ac20,000 using a 3D printer to repair his Lamborghini Murci\u00e9lago"},"content":{"rendered":"

Some supercar owners are overflowing with creativity. Such is the case of this Lamborghini<\/a> who refused to spend \u20ac20,000 to replace the front lights on his Murci\u00e9lago... and instead reproduced them at home using a 3D printer.<\/p>\n\n\n\n

A pair of new lights for \u20ac20,000<\/h2>\n\n\n\n

Some parts on a Lamborghini Murci\u00e9lago can cost a fortune, especially when they're rare or no longer produced. That's what this owner discovered when he wanted to replace the cracked front light (and not just a little) on the Lamborghini he's restoring. <\/p>\n\n\n\n

\"\"<\/figure>\n\n\n\n

On consulting an official dealer, he was offered a quote of over \u20ac20,000 for a pair of new original lights. <\/p>\n\n\n\n

\"\"<\/figure>\n\n\n\n

We've checked and it's true that a front light to US specification costs over \u20ac9,000, and a front light to EU specification between \u20ac5,000 and \u20ac6,000. The price quoted by the owner, located in the US, who was offered a pair of lights for 22,999 $, is therefore correct.<\/p>\n\n\n\n

His cost-saving solution: modeling + 3D printing<\/h2>\n\n\n\n

Far from being discouraged, he decided to scan the broken light, model it in 3D and print it piece by piece, including the reflective parts. To do this, he uses a special heat- and UV-resistant resin, then sands, polishes and assembles the whole thing before installing it on his car.<\/p>\n\n\n\n

But it's impossible to make an identical copy of the original, which would be illegal and technically complex. So he decided to create a customized front light.<\/p>\n\n\n\n

\"\"<\/figure>\n\n\n\n
\"\"<\/figure>\n\n\n\n
\"\"<\/figure>\n\n\n\n
\"\"<\/figure>\n\n\n\n
\"\"<\/figure>\n\n\n\n
\"\"<\/figure>\n\n\n\n

The rendering is clean, but different from the original part. Although it doesn't have adaptive lighting, the 3D-printed light blends in perfectly with the bodywork, giving the Murci\u00e9lago a new look. Estimated cost: a few dozen euros' worth of resin, a little paint, and many hours of work. See all the steps in the video below.<\/p>\n\n\n\n

\n